Call us at 732 292-1994 or 800 867-6690   |  Email us at  |  Visite us on


SMX-1000 Plus/SMX-1000L Plus

Non-Destructive Testing >> SMX-1000 Plus/SMX-1000L Plus

SMX-1000 Plus/SMX-1000L Plus
Microfocus X-Ray Fluoroscopy System

X-ray Inspection Systems Taking Ease of Use and Functionality to New Heights

SMX-1000 Plus/1000L Plus

The SMX-1000 Plus and SMX-1000L Plus X-ray inspection systems are a further refinement of the conventional models(SMX-1000 / SMX-1000L), which have become the benchmarks of the industry.
The operability so well received in the conventional models has been further improved, resulting in simple and easy-to-see windows. Fluoroscopic images and exterior images have been increased in size, providing a new level of visibility.
The measurement functions are much easier to use. Measurement results can now be obtained with a mouse click, with no need for complicated parameter settings.
New functions such as enhanced region-of-interest display have been incorporated, complementing a wealth of conventional functions including navigation via exterior images, step feed, teaching, and image browsing.


Both the SMX-1000 Plus and SMX-1000L Plus provide high-magnification nondestructive fluoroscopic examinations of junction conditions (disconnect, contact) of ultra-micro parts on high-density PCBs, BGAs, CSPs, or system LSIs.


Further Improved Operability

Further Improved Operability

To ensure that the intended operation is performed with no guesswork, windows have been increased in size and completely remodeled with a simple and easy-to-understand layout

Clear Images

Clear images

As with the conventional models, combining a flat panel detector with Shimadzu image processing technology leads to clear, distortion-free images.

Inclined Fluoroscopy

Inclined Fluoroscopy

Performing fluoroscopy at an angle can help detect defects that are undetectable with vertical fluoroscopy.

Easy Measurements

Easy Measurements

Conventionally troublesome measurement parameter settings are automatically optimized thanks to our proprietary image processing technology, so measurement results are obtained with a mouse click.

Superior operability

Inspection condition preset functions

Simply select a setting from the inspection condition list to immediately view the most suitable image of a part (material) without changing X-ray conditions, thanks to each image's wide dynamic range.

Positioning via exterior-view CCD

The stage can be positioned using an image from a CCD camera that can view the entire stage. This allows the stage to be immediately moved to the desired location.

Positioning on the live image (mouse operation only)

Since all instrument operations can be performed using a PC mouse, operators can concentrate on the inspection using just the monitor screen. A useful “center shift” function moves the location clicked by the mouse to the center of the monitor screen.

A wide range of functions provide operator support

Step feed function

This function moves the stage in even increments and improves the efficiency of inspections of samples with identical shapes, such as items placed on pallets.

Teaching function

This function moves the stage to a pre-registered inspection point. Registering an inspection point allows the stage to be moved quickly and improves inspection efficiency when repeatedly inspecting the same type of samples.

Image list

Displays images saved in a folder as thumbnails. As described below, this thumbnail display has a variety of functions to assist operators.

A variety of measurement functions are provided

Dimension measurements

Distances between two points, angles, and curvatures can be measured. Previously, size calibration was required for each image, however, this instrument calibration data is calculated internally together with fluoroscopy magnification for more efficient measurement.

BGA void rate measurement

When measurement is started after setting a threshold, measurement results of all surface protrusions are displayed. Acceptance judgment is automatically performed based on preset acceptance criteria and measurement results can be saved in CSV format files.

Area ratio measurement

The area ratio of an object in a specified ROI (region of interest) such as for die bond or solder wettability can be measured as the object area/ROI area value.

Wire sweep measurement

Wire sweep can be measured simply by clicking both ends of a wire and the maximum curve point and measurement results can be saved in CSV format files.

Optional Equipment

Rotation/Inclination Unit

Attaching the removable rotate and tilt unit allows X-ray fluoroscopy of small parts from a variety of angles, helping to reduce chances of oversights.

Operation Box

Use the joystick and push-button switches on the operation box to manually move the table, change magnification, and operate the rotate and tilt unit.

* For improvement purposes, instrument appearance and specifications are subject to change without notice.

inspeXio SMX-100CT

inspeXio SMX-100CT

inspeXio SMX-225CT

inspeXio SMX-225CT

inspeXio SMX-90CT

inspeXio SMX-90CT

SMX-1000 Plus/SMX-1000L Plus

SMX-1000 Plus/SMX-1000L Plus




1. EXPERIENCED-We have been building labs, equipping labs, and supplying lab equipment parts and service for over 20 years. With over 100 years of combined lab equipment experience at our site and working with many experienced technicians, we try to offer the right equipment at the right price for you, our partner.

2. SAVE MONEY- We sell, lease, and rent - You save money, 5-70% off original retail, so you get great equipment at a great price.

3. WARRANTY -We offer a warranty on our refurbished equipment and new manufacturer warranty on new equipment.

4. SERVICE- We offer instrument service, refurbishment validations, and calibrations at great rates and skill levels.

5. INSTRUMENT PARTS- We sell new instrument parts and new equipment parts and hard to find used older parts

6. UNIQUE- We are an independent dealer and also sell used instruments, such as AA, FTIR, GC, GC/MS, HPLC, LC/MS, ICP, ICP/MS, Particle Size Analysis, UV/VIS, and UV/VIS/NIR. This equipment is manufactured by companies like Agilent, Hewlett Packard, Waters, Hitachi, Perkin Elmer, Shimadzu, Beckman, and more. WE ARE NOT AFFILIATED WITH THESE COMPANIES IN ANY WAY!

7. BUILD LABS- We well discounted made in USA Lab Casework, Fume hoods, Blowers, Safety Cabinets, and Clean Benches.

8. CASH PAID-Top dollar paid, and you can sell your excess, obsolete, surplus equipment with us. We can buy it or sell on consignment.

9. DIVERSIFIED-We sell a very broad line of new and used Lab Equipment. See our detailed listing above.