Jenway 430 Combined pH and Conductivity Meters Jenway 430 Enterprise Conductivity/pH Meter jenway Conductivity meter 430 Jenw

Jenway 430 Combined pH and Conductivity Meters Jenway 430 Enterprise Conductivity/pH Meter jenway Conductivity meter 430 Jenway pH meter 430

• Simultaneous display of pH, conductivity and temperature
• Automatic or manual calibration
• Combined pH, conductivity and temperature probe
• Power on self check routine
• Auto-selecting ranges for both TDS and conductivity modes

The easy to use 430 is designed to readily withstand the rigors of field work, while reliably measuring pH and conductivity. The unit allows the simultaneous readout of pH, conductivity or TDS and temperature with switched ranges for both conductivity and TDS measurements.


Technical Specification

Parameter 430
pH range 0.00 to 14.00 (1 or 2 point calibration)
pH resolution 0.01
pH accuracy ±0.02
Auto. buffer recognition 4.00, 7.00, 9.22, 10.00
mV range - ±1999.9mV
mV resolution - 0.1mV
mV accuracy - ±0.2mV
Conductivity ranges 5 auto selected from 0 to 199.9mS
Conductivity resolution 0.01uS to 0.1mS
Conductivity accuracy ±0.5% ±2 digits
Cell constant 0.01 to 19.99
Automatic standard recognition 10uS, 84uS, 1413uS, 12.88mS (with manual override)
TDS range 5 auto selected from 0 to 199.9g/l
TDS resolution 0.01mg/l to 0.1g/l
TDS accuracy ±0.5% ±2 digits
EC ratio (TDS) 0.50 to 0.80
Temperature range -9.9 to 99.9°C
Temperature resolution 0.1°C
Temperature accuracy ±0.5°C
ATC and manual 0 to 99.9°C
Temperature coefficient 0.00 to 4.00%/°C
Reference temperature 18, 20 or 25°C
Additional modes -
GLP -
Outputs -
Connector mini DIN
Power 2 AA batteries (included)
Size (l x w x d) 175 x 75 x 35mm / 7 x 3 x 1.4 in
Weight 250g / 0.6lbs