Call us at 732 292-1994 or 800 867-6690 | Email us at triadscientific@gmail.com | Visite us on
PLANET BEST
Lab Instrumentation
Lab Equipment
Lab Furniture
Thermo Electron Finnigan LTQ XL Mass Spectrometer Thermo Electron LTQ Thermo LTQ SURVEYOR HPLC system or optionally Agilent 1100 HPLC SYSTEM used system REFURBISHED WHEN SHIPPED
This system as shown is an Thermo Electron Finnigan LTQ
We work with technicians who can upgrade this system to be similiar like Thermo Electron Finnigan LTQ XL
Training and Installations and Validation SERVICES and CALIBRATIONS are available
ThermoElectron Finnigan LTQ is a linear ion trap mass spectrometer equipped with an electrospray ionization source.
- ThermoElectron Surveyor HPLC system is interfaced to the mass spectrometer for automated LC-UV-MS and LC-UV-MS/MS analyses.
- LTQ is a state-of-the-art, segmented linear ion trap with improved capacity, trapping efficiency, and scan speed when compared to a 3-dimensional trap.
- In addition, these features result in sensitivity increases that are approximately 100-fold higher than other mass spectrometers, including the TSQ triple quadrupole.
- LTQ can be set up to collect full scan MS and MSn (n=2-10) data.
- Advanced scanning modes include data-dependent scans, zoom scans, and ultra zoom scans.
- Ion mapping experiments can be used to generate full scan, neutral loss, and parent ion maps. Both positive and negative ions can be detected.
- The Ion Max electrospray source features an off-axis probe design with interchangeable ESI and APCI probes.
- A wide range of flow rates can be accommodated, allowing for sample introduction via HPLC, flow injection, or direct infusion.
- A Thermo Surveyor HPLC system contains a quaternary, low-pressure mixing pump with vacuum degassing, an autosampler with temperature-controlled tray, a column oven, and a photodiode array detector or UV VIS detector are all Optionally available
- Flow rates from 25 to 2000 uL/min can be generated for use with 1 mm, 2.1 mm, and 4.6 mm ID columns.
- Thermo Mass spectrometer and all peripheral components are controlled through the Xcalibur software.