Call us at 732 292-1994 or 800 867-6690 | Email us at triadscientific@gmail.com | Visite us on
PLANET BEST
Lab Instrumentation
Lab Equipment
Lab Furniture
Jenway PFP7C Clinical Flame Photometer Jenway Photometer PFP7C Clinical Jenway flame photometer Jenway Clinical Flame Photometer supplied with Na, K, and Li filters
• Designed for clinical analysis
• Supplied with Na, K and Li filters
• Low temperature, single channel
• Flame failure safety system
• Operates with propane, butane, natural gas or LPG
The PFP7C is a low temperature, single channel flame photometer that is specifically designed for use in clinical applications for the determination of sodium, potassium and lithium. The in-built linearizer circuitry of the PFP7C enables readings of both sodium and potassium to be displayed directly in mmol/l. The series 7 diluter is available for use with the PFP7C to enable serum samples to be diluted efficiently and accurately to the required ratios.
Technical Specification
Parameter PFP7/C
Range 120 to 160mmol/l Na, 0 to 10.0mmol/l K
Limits of detection Na 0.2ppm*
K 0.2ppm*
Li 0.25ppm*
Reproducibility <1% coefficient of variation for 20 consecutive samples using 10ppm Na set to read 50
Linearity < 2% error when 3ppm Na/K and 5ppm Li are set to read 100
Stability < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0. Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5%
Recorder output Nominal 1.00V for a reading of 100.0
Electrical supply 90-125V or 190-250V @50/60Hz
Air supply Moisture and oil free, 6 liters/min @ 14psi
Fuel Propane, butane, natural gas or LPG
Size (w x d x h) 420 x 360 x 300mm / 16.7 x 14.3 x 12in
Weight 8kg / 17.6lbs
*assumes optimal setup with clean, dry air & laboratory grade fuel
Ordering Information
Part Code Description
500 801 PFP7C clinical flame photometer supplied with Na, K and Li filters, connecting hoses and clips, compressor plug and drain trap (240V/50Hz)
500 831 PFP7C clinical flame photometer supplied with Na, K and Li filters, connecting hoses and clips, compressor plug and drain trap (120V/60Hz)
Note: This product will only work with the correct type of compressor and gas regulator.