Call us at 732 292-1994 or 800 867-6690 | Email us at triadscientific@gmail.com | Visite us on
PLANET BEST
Lab Instrumentation
Lab Equipment
Lab Furniture
Jenway PFP7 Industrial Flame Photometer Jenway Photometer PFP7 industrial Jenway flame photometer Jenway Industrial Flame Photometer supplied with Na, K, Ba, Ca and Li filters
connecting hoses and clips, compressor plug and drain trap
• Designed for industrial analysis
• Supplied with Na, K, Li, Ba and Ca filters
• Low temperature, single channel
• Flame failure safety system
• Operates with propane, butane, natural gas or LPG
The PFP7 is a low temperature, single channel flame photometer that is designed for the routine determination of sodium, potassium, calcium, barium and lithium concentrations. The flame failure safety system makes these products ideal for use in industrial and educational environments. The use of fine and coarse sensitivity controls allows for accurate measurements each and every time.
Technical Specification 1
Model PFP7
Range 0 to 199.9ppm
Limits of detection Na 0.2ppm*
K 0.2ppm*
Li 0.25ppm*
Ca 15ppm*
Ba 30ppm*
Reproducibility <1% coefficient of variation for 20 consecutive samples using 10ppm Na set to read 50
Linearity < 2% error when 3ppm Na/K and 5ppm Li are set to read 100
Stability < 2% drift over 5min when continuously aspirating 10ppm sample set to 50.0. Specificity Interference from Na/K and Li equal in concentration to test element will be <0.5%
Recorder output Nominal 1.00V for a reading of 100.0
Electrical supply 90-125V or 190-250V @50/60Hz
Air supply Moisture and oil free, 6 liters/min @ 14psi
Fuel Propane, butane, natural gas or LPG
Size (w x d x h) 420 x 360 x 300mm / 16.7 x 14.3 x 12in
Weight 8kg / 17.6lbs
*assumes optimal setup with clean, dry air & laboratory grade fuel
Ordering Information
Part Code Description
500 701 PFP7 industrial flame photometer supplied with Na, K, Ba, Ca and Li filters, connecting hoses and clips, compressor plug and drain trap (240V/50Hz)
500 731 PFP7 industrial flame photometer supplied with Na, K, Ba, Ca and Li filters, connecting hoses and clips, compressor plug and drain trap (120V/60Hz)